Tuesday 7 April 2015

How to increase RAM on MacBook Pro

How to increase RAM on MacBook Pro


Step 1: Find out what kind of RAM you need

Once you determine that your MacBook can be upgraded, you'll need to find out how much RAM it can handle, and what type. To do that, go to this Apple help page and make note of:
  • The number of memory slots (usually 2)
  • Maximum memory (such as 8GB)
  • Memory card type (such as 1,600 MHz and DDR2 or DDR3)
You can also get these details by going to the Apple menu > About This Mac > Memory.
With that info, you can head out and buy your RAM. If your computer can handle 8GB of RAM total and has two slots, for example, you'll buy two 4GB memory cards.

Step 2: Install the new RAM

Installing RAM is simple -- even someone who's not tech-savvy can complete the task. To install the RAM, do the following:
  1. Shut down your computer.
  2. Flip your laptop over so that the bottom cover is facing up. Using a Phillips-head screwdriver, unscrew the 11 screws that keep the cover fastened.
  3. Set the cover aside. Touch a metal part on the inside of your laptop to release any static electricity.
  4. Locate the RAM slots (see photo gallery). One at a time, push the levers in an outward direction to release the card, then gently remove it.
  5. Install the new RAM by inserting them into the slots, with the gold contact strip facing in. To secure the RAM in place, push down and listen for a click.
  6. Replace the bottom cover and power up your computer.

Step 3: Test the RAM

Before you pat yourself on the back, you'll need to make sure the new RAM is healthy. In some cases, bad RAM can negatively affect your system and even result in data loss.

0 comments :

Post a Comment

 

Copyright @ 2013 Tech Source .